Sony wega trinitron 21 manual

Use a cloth lightly dampened with water for cleaning the exterior of the set. If a snapping or popping sound from a TV set is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician.

It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. Always use two or more people to lift or move the set. The set is heavy and the bottom surface is flat. Serious injury can result from trying to move the set by yourself alone, or from unsteady handling.

Do not use power-line operated sets near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

Do not place the set on an unstable cart, stand, tripod, bracket, table, or shelf. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart or stand recommended by the manufacturer for the specific model of TV. An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. Do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse.

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section of the National Electrical Code NEC in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to lightning and power-line surges. Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:.

Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a. Do not attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks as specified by the manufacturer to determine that the set is in safe operating condition, and to so certify. When the set reaches the end of its useful life, improper disposal could result in a picture tube implosion.

Ask a qualified service technician to dispose of the set. About this Manual Batteries for the Remote Control Front Panel Menu Controls Remote Control Description TV Rear Panel Basic Connections Connecting Additional Equipment Quick Start to the Menus How to Access Menus Using the Video Menu Using the Audio Menu Using the Channel Setup Menu Using the Parental Control Menu Parental Control Canada: Selecting Custom Rating Options Using the Timer Menu Using the Setup Menu Before you begin using this manual, please check the model number located on the rear of your TV or on the front cover of this manual.

Surround — Simulates theater quality sound for stereo programs. Parental Control V-Chip — A tool to help parents monitor what their children watch on TV by establishing rating limits. Favorite Channels — Instant access to your favorite channels with the touch of a button. Front Panel Controls — Allows access to the on-screen menus without the use of a remote control. Auto Mute — A friendly feature designed to automatically mute your TV when no signal is received.

This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Insert two AA R6 batteries supplied into the remote control using the following illustration as a guide. Under normal conditions, batteries will last up to six months.

If the remote control does not operate properly, the batteries might be worn out. If you will not be using the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage. The front panel controls allows you to access the menu without the remote control.

The front panel controls also allows you to change the channels, adjust the volume and change the video inputs. Control Remote. Read this section before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting. The rear panel illustrated in this manual is for KVFS The rear panel on your TV may not look exactly like those illustrated.

Depending on the cable available in your home, choose one of the connections below:. Use this to connect the TV to a cable system or an antenna with a ohms cable.

If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for best reception. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox.

Please check your email for further instructions. Enter a new password. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. Protecting the TV To prevent internal heat build-up, do not block the ventilation openings.

WARNING To guard against injury, the following basic safety precautions should be observed in the installation, use, and servicing of the set. For those sets designed to operate from battery power, refer to the operating instructions. Grounding or Polarization This set may be equipped with a polarized alternating current line plug a plug having one blade wider than other.

For the set with a polarized AC power cord plug This plug will fit into the power outlet only one way. If the plug still fails to fit, contact your electrician to have a suitable outlet installed.

Alternate Warning For the set with a three-wire grounding type AC plug This plug will only fit into a grounding-type power outlet. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Corrosion Use of this TV near the seashore may subject the set to excessive salt, corrosion and internal damage and result in deterioration of the TV's performance. Object and Liquid Entry Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the set. Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards. With the PIP feature, you can display two different TV programs or video input at the same time by using the button.

You can select your desired TV program directly from the sub screen by using V or v buttons. Press V or v until the desired program appears on the sub screen. Press or b to display the sub screen in full screen. You can only display a video input, in the sub screen by swapping the picture when a video input is displayed in the main screen.

You can begin singing or speaking from the microphone at the last TV volume setting. B , or b to adjust the microphone volume and echo level of the microphone. Select the desired TV channel or external inputs and press. The selected preset FM radio station number and label will appear on the screen. The preset number and label will not be displayed. There will be no stereo effect, but the noise will be reduced. The sound becomes monaural but the noise is reduced.

Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. Welcome to ManualMachine.

We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Do not not expose the TV to rain or and the antenna cable during allow children to climb onto it.

Do not place any objects on the TV. Have it and floor which can support the exposed to dripping or splashing checked immediately by qualified TV set weight. Ensure that the TV and that no objects filled with personnel only. Do not install home use only. Do not use the TV appliances to the same power the TV in a confined space, such in any vehicle or where it may be socket. Do not damage the power as a bookcase or built-in cabinet. Do not open the cabinet and the Clean the TV with a dry and soft Pull the power cord out by the rear cover of the TV as high cloth.

Do not use benzine, thinner, plug. Do not pull the power cord voltages and other hazards are or any other chemicals to clean the itself. Even if your TV is turned present inside the TV. Refer TV. Do not attach anything e.

Do not scratch the picture Unplug the TV before moving it tube. Installation Securing the TV Advanced Operations Selecting the picture and sound modes Made in Malaysia. Use of other screws may damage the TV. Step 2 Connect the antenna cable not supplied to 8 antenna input at the rear of the TV.

Step 3 Plug in the power cord, then press! The selected menu language appears. The screen will indicate automatic presetting is in progress. Select Confirm End. The selected channel will appear on the screen. Select Confirm End 5 If the upper and lower bars are not equally positioned to the top and bottom of the screen, press V or v to adjust them, then press. Select Confirm End If no adjustment is necessary, then press.

Button Description Page 1?