Yale lock installation instructions

Control your yale smart lock from anywhere:. To addanew device, firstsendthem an invite: If you need information on install. Follow the in app setup steps android. I stumbled upon the answer and kicked myself for not thinking of it myself. Through the lock setup flow, but will be unable to complete the flow as the device is already. This lock is not for use with the yale assure app 1. Although i added the nest connect to the app so many times but never seeing the lock appear in app , i had not added the actual yale x lock itself.

Yale assure locks without the modules use bluetooth to work with the yale assure app. Agree to allow access to your home data. So taking the battery cover off, there was the qrl sticker right at the top. Select the set up a device. Choose continue, doorsense is installed when prompted create the house to match the property nickname on lynx. I have recently bought a nest yale lock with nest connect. The smartapps will help you setup up to 10 user codes based on my custom lock device that i created for my yale locks corrected some timeout issues.

Start with your phone about a foot away and slowly move it closer to the code. You can view 3d, interactive. Unlock and lock your door from wherever you are. On the main menu of the app click setup a new device select setup a yale lock follow the instructions on the screen;. Enter the guest's phone number or select them from your contact's list to invite them to use your lock. Reproduction in whole or in part without the express written permission of yale security inc.

Backsets come in either 60mm or 40mm size. The 60mm is generally the one used as it is a little more secure than the 40mm backset because the hole required for the cylinder is further away from the edge of the door making it much less likely to break off when force is applied to the door. The night latch cylinder is a small cylinder in which the key is inserted at the front of the door.

It passes through the hole drilled in the door after being inserted into the securing washer. The metal tail of the cylinder is also called a cam bar. The cam bar is turned by the key and it operates the latch, via the spring to open and close the door. The cam bar can be cut down to suit thinner doors.

Usually complain if it does not! If you are lucky enough to have a template, fold it over the door edge at point A. An important point to remember when fitting all door locks and latches is to hold the drill level when you make any holes. If any holes, especially holes for latch cylinders, are drilled at an angle through the door, the two faces will not line up and the key or knob will be very tight which leads to a malfunctioning lock in no time.

There are two positions for a night latch to be fitted, depending on the size of the latch. The larger latches are set back from the door edge by 60mm with the smaller latches being set back 40mm. The thickness of doors can vary so you may have to cut down the cam bar to suit your door. When it comes to what height the fitted latch should be when installed, the usual height is about mm from the ground but there are no rules.

Look at the instructions for the diameter of the hole you need to drill in the door to put the lock barrel through. This hole is usually 32mm and should accommodate an 8mm offset so that the cam bar also aligns correctly and a flat wood bit, or an auger bit will be used for this hole but make sure you drill the hole from both sides of the door with a level drill.

If you push a drill bit this big through the door it will split the timber coming out the other side. Using a flat or auger bit makes this easy as you will see the very fine point of the drill bit emerge from the other side of the door first.

Once you see the tip, withdraw the drill and put the tip on the other side in the small hole it created. This ensures that both halves of the hole will line up perfectly as long as the drill bit has been and remains level.

Insert the cylinder through the front plate and onto the door. Fix the mounting plate to the back of the door. The cylinder will fix to the mounting plate with the two long screws provided. These screws are marked as B in the image above. Put the back set over the mounting plate and mark round the door edge overhang. Chisel this out using a sharp chisel. Drill pilot holes for the screws which attach the body of the lock having checked the length of the locking bar.

If the bar is too long it can be easily cut with a hacksaw. Fit the lock body and tighten. Push the new lock towards the door frame and mark the height and position for the latch. Make sure the bolt responds to the handle. The bolt should extend into the hole in the door frame and retract smoothly. Handing of a door refers to how it swings in relation to the room it is used to secure.

To determine if a door is right or left handed, stand on the outside of the room. Observe where the hinges of the door are. If they are on the left, then the door is left handed.

If they are on the right then the door is right handed. The lock should be handed based on the handing of the door. This Yale keypad lock automatically hands itself determines if it should operate as a left or right handed lock immediately the batteries are installed.

It is important that you do not install the batteries until the entire Yale keypad lock installation process is complete. If batteries are installed before the lock is fully installed, it may hand itself wrongly. When this happens, you will have to complete the installation then reset the lock to factory default settings.

This will make the lock hand itself a fresh. Doing your Yale keypad lock installation yourself can be very fulfilling. Be sure to follow the guide to the letter to avoid creating problems which might end up costing you more than professional installation to rectify.

Escutcheon is a word generally used to refer to an aesthetic plate used to cover a functional item. In reference to a lock, it is the part of the lockset which surrounds and protects the lock cylinder.

It also protects the area from gradual damage when the end of the key misses the keyhole. The bolt and hole in the door frame may be misaligned. If so, you may need to remove and re-position the strike plate.

The lock will work fine on either kind of door.