Asus p5g41-m lx2 gb manual

Page Internal Connectors The system may become unstable or may not boot up if the power is inadequate. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Page Asus Ez Flash 2 Follow the onscreen instructions to complete the updating process. Page Asus Crashfree Bios 2. Page System Information 2. The BIOS automatically detects the items in this menu.

Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory. Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. The values range from 1. Page Cpu Configuration 2. Page Chipset Allows you to select the front panel support type.

Page Apm Configuration 2. When set to [Power On], the system goes on after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Disabled] [Enabled] 2. Page Tools Menu 2. This symbol of the crossed out wheeled bin indicates that the product electrical and electronic equipment should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. If possible, disconnect all power cables from the existing system before you add a device. These devices could interrupt the grounding circuit. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

Contact a qualified service technician or your retailer. It could explode and release harmful substances into the environment. Take it to a hazardous material collection point.

If you detect any damage, contact your dealer immediately. Do not place the product in any area where it may become wet. This motherboard should only be used in environments with ambient temperatures between 5 o C 41 o F and 40 o C o F.

This user guide contains the information you need when installing and configuring the motherboard. This chapter describes the features of the motherboard and the new technology it supports. Detailed descriptions of the BIOS parameters are also provided. Refer to the following sources for additional information and for product and software updates.

Refer to the ASUS contact information. Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package. To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

NOTE : Tips and additional information to help you complete a task. The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

Shader Model 4. It is enhanced with an ACPI management function to provide efficient power management for advanced operating systems. This feature allows you to convert your favorite photo into a color boot logo for a more colorful and vivid image on your screen.

ASUS AI NET2 remotely detects the cable connection immediately after you turn on the system and any faulty cable connections are reported back up to meters at 1 meter accuracy. This special design protects expensive devices and the motherboard from damage caused by power surges from switching power supply PSU. It detects the current computer loading and intelligently adjusts the power in real-time.

After the easy setup, Turbo Key can boost performances without interrupting ongoing work or games—with just one touch! Take note of the following precautions before you install motherboard components or change any motherboard settings.

Failure to do so may cause severe damage to the motherboard, peripherals, or components. The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode.

This is a reminder that you must shut down. The illustration below shows the location of the onboard LED. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Ensure that you unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

Place six screws into the holes indicated by circles to secure the motherboard to the chassis. Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the cam box is facing towards you and the load lever is on your left.

Press the load lever with your thumb A , then move it to the left B until it is released from the retention tab. Position the CPU over the socket, ensuring that the gold triangle is on the bottom left corner of the socket then fit the socket alignment key into the CPU notch. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring. If it gets into your eyes or touches your skin, ensure that you wash it off immediately, and seek professional medical help.

Close the load plate A , then push. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Next Page. Page 2 Product warranty or service will not be extended if: 1 the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or 2 the serial number of the product is defaced or missing.

Page 3: Table Of Contents Internal connectors Page 4 2. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product electrical and electronic equipment should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT throw the mercury-containing button cell battery in municipal waste.

This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. If possible, disconnect all power cables from the existing system before you add a device. These devices could interrupt the grounding circuit.

If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. Contact a qualified service technician or your retailer. Page 7: Conventions Used In This Guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

NOTE: Tips and additional information to help you complete a task. Where to find more information Refer to the following sources for additional information and for product and software updates.

Refer to the ASUS contact information. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Typography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase. Page 9 Internal connectors 2 x USB 2.

Refer to page ix for the list of accessories. If any of the items is damaged or missing, contact your retailer. Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Failure to do so may cause severe damage to the motherboard, peripherals, or components. This is a reminder that you must shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

Page Motherboard Overview Motherboard overview 1. The edge with external ports goes to the rear part of the chassis. Page Memory Configurations 1. The system maps the total size of the lower-sized channel for the dual-channel configuration.

Any excess memory from the higher-sized channel is then mapped for single-channel operation.