File device time

Backup disks you can use with Time Machine Time Machine can back up certain external storage devices connected to your Mac or available on your network.

From the list of services on the left, select File Sharing. Control-click the folder that you added, then choose Advanced Options from the shortcuts menu that appears. Connect the drive directly to your Mac, then use Disk Utility to erase it. Open AirPort Utility, then select your base station and click Edit to view its settings. Click the Disks tab in the settings window. Enter your search terms:. Key Action? Adds comments to saved template, configuration, or schema; default: false.

Name of the xml attribute which gives the edge weight; default: traveltime. Shifts all times loaded from a saved state by the given offset; default: 0. Prefix which is applied to all output files. Defines the number of digits after the comma for floating point output; default: 2. Defines the number of digits after the comma for lon,lat output; default: 6.

Write time values as hour:minute:second or day:hour:minute:second rather than seconds; default: false. Write positions and speeds with the given precision default 2 ; default: 2.

Write emission values with the given precision default 2 ; default: 2. Write emission values scaled to the step length rather than as per-second values; default: false. Write elecHybrid values with the given precision default 2 ; default: 2. Write substation values with the given precision default 2 ; default: 2. Add the vehicle signal state to the FCD output brake lights etc. Add kilometrage to the FCD output linear referencing ; default: false. Add leader vehicle information to the FCD output within the given distance ; default: Write tripinfo output for vehicles which have not arrived at simulation end; default: false.

Write tripinfo output for vehicles which have not departed at simulation end because of depart delay; default: false. Write the output with the intended instead of the real departure time; default: false. Write vehroute output for vehicles which have not arrived at simulation end; default: false. Include invalid routes and route stubs in vehroute output; default: false.

Write the vehicle speedFactor defaults to 'true' if departSpeed is written ; default: false. Save bluetooth visibilities into FILE in conjunction with device. Write stop output for stops which have not ended at simulation end; default: false.

Write internal state values with the given precision default 2 ; default: 2. Defines the begin time in seconds; The simulation starts at this time; default: 0. Defines the end time in seconds; The simulation ends at this time; default: Whether to use ballistic method for the positional update of vehicles default is a semi-implicit Euler method. Whether vehicles that depart between simulation steps should extrapolate the depart position; default: false.

Defines the resolution in m when handling lateral positioning within a lane with -1 all vehicles drive at the center of their lane; default: How to deal with collisions: [none,warn,teleport,remove]; default: teleport. Let vehicle stop for TIME before performing collision. Increase or decrease sensitivity for junction collision check; default: 0.

Sets the fraction of minGap that must be maintained to avoid collision detection. If a negative value is given, the carFollowModel parameter is used; default: Delay vehicle insertion to stay within the given maximum number; default: Abort the simulation if the given maximum number of teleports is exceeded; default: Scale demand by the given factor by discarding or duplicating vehicles ; default: 1. Specify how long a vehicle may wait until being teleported, defaults to , non-positive values disable teleporting; default: The waiting time after which vehicles with a disconnected route are teleported.

Negative values disable teleporting; default: Whether vehicles shall be removed after waiting too long instead of being teleported; default: false. Length of time interval, over which accumulated waiting time is taken into account default is s. How long vehicles wait for departure before being skipped, defaults to -1 which means vehicles are never skipped; default: Whether insertion on an edge shall not be repeated in same step once failed; default: false.

Whether each vehicle is checked separately for insertion on an edge; default: false. Each vehicle receives a random offset to its depart value drawn uniformly from [0, TIME]; default: 0.

Whether overtaking on the right on motorways is permitted; default: false. Let railsignals operate in moving-block mode by default; default: false. Specify how long a vehicle may wait until impatience grows from 0 to 1, defaults to , non-positive values disable impatience growth; default: Length of the default interval length between action points for the car-following and lane-change models in seconds.

Select default car following model Krauss, IDM, Select default speed deviation. Enable recuperation from the vehicle equipped with elecHybrid device into the ovrehead wire. Enable current limits of traction substation during solving the overhead wire electrical circuit. Sets the fraction of emergency decel capability that must be used to trigger a warning. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No.

Any additional feedback? Important The improved Microsoft Defender portal is now available. Tip For detailed information about the events types ActionType values supported by a table, use the built-in schema reference available in the Defender for Cloud.

Note File hash information will always be shown when it is available. Submit and view feedback for This product This page. View all page feedback. In this article. Type of activity that triggered the event. See the in-portal schema reference for details.